WE HAVE MANUAL TRANSFER SWITCHES FOR EVERYTHING FROM THE SMALLEST PORTABLE GENERATOR, TO THE LARGEST INDUSTRIAL APPLICATION

THE ASCO SERIES 165 MANUAL TRANSFER SWITCH WILL CONNECT EITHER YOUR WHOLE HOUSE OR AN EMERGENCY SUB PANEL TO YOUR EMERGENCY GENERATOR

THE ASCO SERIES 386 MANUAL TRANSFER SWITCH IS RATED UP TO 3000 AMPS, AND WILL MEET THE MOST DEMANDING INDUSTRIAL APPLICATION

SERIES 165 MANUAL TRANSFER SWITCH

• Identical to the electrically operated type 165 except operation is manually initiated.

• Operation is achieved through direct manual quick-make/quick-break handle from the outside of the enclosure.

• True double-throw, inherently interlocked construction to absolutely prohibit connecting both sources together.

• UL 1008 Listed for total system loads.

• Ideal for those applications that have manual start generators without provisions for automatic engine start.

• Pad locking provisions on operating handle to prevent unauthorized operation.

• Same withstand and close-on ratings as Series 165 automatic version.

• Series 165 manual transfer switch operators manual (196Kb)

SERIES 386 MANUAL TRANSFER SWITCH

ASCO 386 non-automatic transfer switches are generally used in applications where operating personnel are available and the load is not an emergency type requiring automatic transfer of power.

The power-switching mechanism and controller is the same hardware used on the highly reliable ASCO Series 300 transfer switches. ASCO 386s are furnished as standard with a momentary type selector switch to initiate transfer and retransfer.

ELECTRICAL FEATURES

• Listed under UL 1008

• Door-mounted selector switch for local, manually initiated electrical control.

• Sizes for 30 through 3000 amps.

• Available to 600 VAC, 50 or 60 HZ.

• Rated for all classes of load transfer.
  100% tungsten load ratings through 400 amps.

• Designed for emergency and standby applications.

• Same withstand and close-on rating as Series 300.

OPERATIONAL FEATURES

• Inphase monitor to transfer motor loads between live sources, without any intentional off time, to prevent inrush currents from exceeding normal starting levels.

• Selective load disconnected, double-throw contact to operate at an adjustable 0 to 20 second time delay prior to transfer and reset 0 to 20 seconds after transfer.

• High/Low nominal voltage setting. Allows user to adjust for source low reduced voltage conditions in remote areas.

• 60 Hz or 50 Hz selection switch.

• Single/Three-phase selection Switch.

• Switch position indicating signal lights.

• One auxiliary contact, closed when transfer switch is connected to normal and one closed on emergency, standard feature 14A/14B

ALL ASCO SERIES 386 MANUAL TRANSFER SWITCHES ARE BUILT TO ORDER AND HAVE A 3 TO 5 WEEK LEAD TIME

ASCO SERIES 386 MANUAL TRANSFER SWITCH PRICES

DON'T SEE THE GENERATOR TRANSFER SWITCH YOU'RE LOOKING FOR?

Call us toll free at (866)321-6855

or E-mail us at sales@transferswitch4less.com

We can supply you with any ASCO series 386 Manual Transfer Switch, at the lowest prices in the country.